Po Ly Gim B-Axis Swiss turning centres

B-AXIS SWISS TURNING CENTRES

The Po Ly Gim DIAMOND 25 + 32 + 42 CSL Swiss turning centres offer up to 7 stationary o.d. turning tool stations, 6 cross working driven tool stations, up to 3 stationary i.d. turning tool stations, 2 front off-centre driven tool stations, 4 back stationary i.d. turning tool stations, 3 back off-centre driven tool stations and . . . a 360° B-axis rotary tool system with 3 or 8 tool stations serving both the main and sub-spindle to machine part diameters up to 42mm:

with a standard C-axis built-in motor main spindle:

and a servo motor sub-spindle with two fixed and two power drills on the side which can move forward and backward suitable for deep hole processing:

and the optional two-sided 8-station 360° B-axis rotary tool system to serve both the main and sub-spindle:

. . . controlled by a 10-axis traveling system (X1, Y1, Z1, C1, X2, Y2, Z2, C2, A and B) with a 3-station 360° B-axis rotary tool system:

. . . and with an 8-station 360° B-axis rotary tool system:

using live bushing with guide bushing or rough material bushing without guide bushing change-over:

to save throw-away remnant (from 150 to 50mm) for shorter parts.

The Po Ly Gim Diamond 32 CSL Swiss turning centre in action:

The Po Ly Gim Diamond CSL25/32/42 Swiss turning centre brochure:

The Po Ly Gim DIAMOND CSL 12-2Y + CSL 16-2Y Swiss turning centres offer high flexibility to process smaller material diameter through its 2-sided 360° B-axis rotary tool system with 6 tool stations serving both the main and sub-spindle plus simultaneous opposite turning + milling for pinch turning / pinch milling operations to reduce any small diameter material deflection to an absolute minimum and reduce cycle times:

. . . controlled by a 10-axis traveling system (X1, Y1, Z1, C1, X2, Y2, Z2, C2, A and B) with a 6-station 360° B-axis rotary tool system plus pinch turning/milling/drilling: