Ron Nater
  • brands
  • types
Picture
offers multi-3/4/5-axis machining centres with a large rectangular table for 3-axis vertical machining, a single-axis swivelling milling head for 4-axis machining and a flush mounted integral rotary table with the B-axis swivelling milling head for full high-rigidity 5-axis machining.
This includes the
Picture
BC C-frame multi-3/4/5-axis machining centres
(BC-T models with 800 rpm rotary turning table)
The rectangular table with the integrated flush-mounted rotary table surface is highly accessible through a large combined front/top door opening with unrestricted access for overhead crane part loading/unloading. With this ergonomic machine design (as the table travels from the front to the back in the Y-axis) this machine offers very operator friendly straight back part + fixturing access for part loading/unloading, set-up and checking. 

​And the 
standard side door allows automatic 2-pallet or multi-pallet change system access for extended unmanned operation with full front door operator access.

The single axis rotary table integrated in the rectangular table (combined with a single axis swiveling milling head for full 5-axis machining) offers high rigidity + stability during 3/5-axis machining (as there is no simultaneous table tilting/rotating for the 5-axis machining movements eliminating any 2-axis trunnion fixture deflection as associated with a 2-axis trunnion table) and a larger 3-axis machining table support surface:
Picture
Picture
And with the optional single axis rotary turning table the Leadwell BC-T series becomes a multi-tasking 3/5-axis machining/turning centre.
the Leadwell BC C-frame multi-3/4/5-axis machining centre flyer
Picture
the Leadwell BC-600 C-frame muti-3/4/5-axis machining centre pictures
the Leadwell BC-700 C-frame multi-3/4/5-axis machining centre picture
Picture
the Leadwell BC-800 C-frame multi-3/4/5-axis machining centre pictures
the Leadwell BC-960 C-frame multi-3/4/5-axis machining centre pictures
the Leadwell BC C-frame multi-3/4/5-axis machining centre brochure
Picture
the Leadwell BC C-frame multi-3/4/5-axis machining centre videos
and the
Picture
Focus 5R double column multi-3/4/5-axis machining centre
Picture
Picture
L (Length) = 6430mm, W (Width) = 3750mm, H (Height) = 4878mm
Picture
One-piece base and column with high rigidity
• X/Y-axis travel generated by linear motor direct-drive.
• Maximum X/Y-axis rapid feed rate is 60m per minute.
• European torque motor direct-drive milling head & rotary working table.
• Standard configuration 3 HEIDENHAIN linear scales.
the single-axis swivelling milling head features + specifications
European Fork Type Milling Head
  • Fork type design adopt torque motor direct-drive with the high rigidity and high precision cross roller bearing, to ensure rigidity and precision.
  • High rigidity structure and high braking torque satisfy any position of the milling requirement.
  • High accuracy 0.001 degree indexing on A-axis with rotary table can achieve 5-axis machining.
  • High torque hydraulic brake system and high rigidity cross roller bearing, ensuring high precision and high rigidity.
  • Standard configuration HEIDENHAIN angle encoder to reach high precision machining.
Picture
B-Axis Torque Motor Drive
  • No backlash, no wear and achieve long lasting accuracy
  • High-speed, high-torque, high-acceleration & high-deceleration
  • No ball screw, no worn gears, belts can be tired without easy-to-wear transmission mechanism
  • Simple structure, fast and convenient maintenance, low maintenance cost
Picture
the rotary table features
European Torque Motor Drive Rotary Table
  • Equipped with torque motor direct drive, no gear wear, ensure permanent high precision.
  • High-rigidity & high-precision cross-roller bearings are used to ensure its accuracy and rigidity.
  • Perform five axis machining with a universal milling head.
  • The hydraulic brake system tightly locks the rotating shaft to meet the needs of heavy cutting at any position.
  • Standard HEIDENHAIN rotating encoder achieving high precision machining.
  • Built-in circulating cooling system, able to work stably for a long time.
Picture
Picture
the Ken Focus 5R double column multi-3/4/5-axis machining centre video
Picture
- all Masteel offered 5-axis machining centres -
disclaimer & privacy / 647.270.4434 / ron@masteels.com

​
​© 2023 ron nater
Picture
  • brands
  • types