DIAMOND CSL SWISS TURNING CENTRES with optional rotating B-axis rotary tool system
The Po Ly Gim DIAMOND 25/32/42 CSL Swiss turning centres offer up to 7 stationary o.d. turning tool stations, 6 cross working driven tool stations, up to 3 stationary i.d. turning tool stations, 2 front off-centre driven tool stations, 4 back stationary i.d. turning tool stations, 3 back off-centre driven tool stations, C + Y-axis on the main + sub-spindle, optional thread whirling and . . .an optional rotating B-axis rotary tool system with 3 or 6 or 8 tool stations serving both the main and sub-spindle to machine part diameters up to 42mm:
with a standard C-axis built-in motor main spindle:
and a servo motor sub-spindle with two fixed and two power drills on the side which can move forward and backward suitable for deep hole processing:
and the optional two-sided 8-station 360° B-axis rotary tool system to serve both the main and sub-spindle:
. . . controlled by a 9-axis traveling system (X1, Y1, Z1, C1, X2, Y2, Z2, C2 and A-axis):
or a 10-axis traveling system (X1, Y1, Z1, C1, X2, Y2, Z2, C2, A and 3/6 station 360° B-axis rotary tool system):
. . . or with an 8-station 360° B-axis rotary tool system:
using standard change-over from guide bushing set-up for long part Swiss turning with ground bar stock to no guide bushing set-up for short part conventional turning with regular bar stock to reduce throw-away remnant from 150 to 50mm:
and an optional thread whirling tool holder without or with 90° rotating 3 or 6-station B-axis system - all as shown in the Po Ly Gim 42 CSL Swiss turning centre tooling flyer:
The Po Ly Gim Diamond 32 CSL Swiss turning centre in action:
The oscillation/vibration cutting function to break stringy chips:
the Po Ly Gim Diamond CSL25/32/42 Swiss turning centre brochure
the Po Ly Gim / Iemca B-axis Swiss turning / machining centre job shop package flyer
the Iemca Boss HD 338 - 552 Superfast barfeeder brochure
the Iemca Boss 338 HD Superfast barfeeder video
the Po Ly Gim / Iemca small part Swiss turning + machining centre package flyer (with standard 360° rotating 6-station B-axis for main + sub-spindle and pinch turning/milling)
The Po Ly Gim DIAMOND CSL 12-2Y + CSL 16-2Y Swiss turning centres offer high flexibility to process smaller material diameter (down to 0.6mm bar stock diameter with the Iemca Elite 112 soft touch bar feeder on the DIAMOND CSL 12-2Y model) through its 2-sided 360° rotating B-axis rotary tool system with 6 tool stations serving both the main and sub-spindle plus simultaneous opposite turning + milling for pinch turning / pinch milling operations to reduce any small diameter material deflection to an absolute minimum and reduce cycle times:
. . . controlled by a 10-axis traveling system (X1, Y1, Z1, C1, X2, Y2, Z2, C2, A and B) with a 6-station 360° rotating B-axis rotary tool system plus pinch turning/milling/drilling:
the Po Ly Gim Diamond CSL 12-2Y/16-2Y Swiss turning centre brochure
a Po Ly Gim Diamond CSL 16-2Y Swiss turning/milling centre video